Da Gsense Codes: Wrapping Your Post with Ads - Google Adsense Secrets Revealed

23 January, 2007

Wrapping Your Post with Ads

I discovered that there are quite a lot of adseners want to how to wrap their posts with adsense ads. In fact, it is fairly easy to do so. Today, one such question was raised by Anees in the Adsense Help Forum, and hence I decided to reveal this adsense secret to you. With such nice blending of ads with the background, you can easily have higher CTR.

The procedures are fairly simple. This tricks can be used in the blogs blogger.com, it you are using Wordpress or other blogging softwares, you are on your own.

2. Copy the adsense code as usual.

2. Go to the template of your blog and find <$BlogItemBody$>.

3. Add the table align portion of html that you see at the beginning and end of your adsense code in the photo below.

4. Check out the beginning and end of the AdSense code with the added html. I placed the adsense code in my template (after the "post body" and before the "post footer") using the 125X125 button format.

5. Remember to go into your blogger Settings, click on Formatting, scroll to the bottom of the page and set Enable float alignment to NO.

Just like other editing with the template of your blog. Make sure you have saved the template doing anything. If you stick to the procedures I have mentioned, I'm sure you will have the same success changing the look of your blog as I did. Some templates are set up differently so you will have to experiment to see if this works on your template. I am still using the old blogger version. If you are using new verison, you need to find another solution. Please leave me any comment if you have idea on how to do the same thing in new version or even in Wordpress.

22 Comments:

At 24 January, 2007 19:18, Anonymous said...: Hello, Its Anees from Love Shore I have done as Swinger said. But I cant find <$BlogItemBody$> in the whole HTML codes of my templates. If you wish, I'll send you my codes. I think, In blogger beta (new blogger) we cannot wrap the Adsense codes in our posts. I am using new blogger (Blogger combined with Google account).
Anees
At 25 January, 2007 11:21, Adsense Decoder said...: I tried to use new version of blogger, and some of the settings have been changed. I suggest, if you really want to wrap your ads with text, try to revert back to the old version.

Thank you very much for your question. I hope you enjoy the blog.
At 30 January, 2007 01:30, antash said...: I need help for my old blog because
I can`t shifted to new blog.
At 30 January, 2007 01:42, antash said...: I can`t find <$BlogItemBody$> in my
tamplate.I need help for my old blog
because I could not shifted to new
version.
At 31 January, 2007 02:28, Adsense Decoder said...: Antash,

I think when you switch to use the new version of blogger. All the old blogs will then be changed to the new vresion without a problem.

The <&BlogItemBody&> should be near the post-header. Feel free to contact me if you still have problems with it.
At 02 February, 2007 05:57, Anonymous said...: It is not working with the New beta version. I have tried many way but it dowsnt work
At 02 February, 2007 16:21, gemami said...: i have been denied twice the g adsense account for reasons of a website that is not at perfect active. that is not my fault. also i had gone with about 25 blogs essayed from various sources and divergent in essence and topic.
At 03 February, 2007 09:51, Adsense Decoder said...: Well, I am using the new version too, and I have no problem with that. Please provide more information so that I can help you.
At 21 May, 2007 03:21, starcraft 2 said...: yup... I'm using the new blogger too... any updates?
At 21 May, 2007 14:50, Adsense Decoder said...: Hi starcraft,

You can also try to implemnet the HTML code. I also tested it in new blogger, and should be fine too.

Please put a back link to my site.
At 25 June, 2007 22:50, Dreamer said...: Can you show the steps, how to insert in a new version blogger.com. http://dreamerbigmoney.blogspot.com
At 26 June, 2007 00:29, Adsense Decoder said...: Hi Dreamer,

You can try the methods I mentioned above, and most new version of blogger template also support this function.
At 26 June, 2007 03:28, Saifuddin said...: Can you please update this Post with new blogger screenshot??

http://indonesian-food-recipes.blogspot.com
At 26 June, 2007 11:27, Adsense Decoder said...: Hi saiffuddin,

Nice to meet you again.
Well, there is no big difference between the old and new version of blogger. I may consider to do so if there are further requests.

Thanks.
At 23 July, 2007 16:09, Little Robin Hood said...: Hi,

How to add adsense code after post body?

Thanks
At 23 July, 2007 23:57, Adsense Decoder said...: Hi Robinhood,

I put the Adsense code inside the itempage tags, and immediately after the comment section.
At 07 February, 2008 00:14, jake said...: hey nice codes. but these dont work for the new blogger (i think) coz i cudnt use this.
i found another one working. that worked for me. check:
http://sitesreviewed790.blogspot.com/2008/02/how-to-wrap-adsense-ads-within-blogger.html
At 07 February, 2008 23:31, Adsense Decoder said...: Hi Jake,

Yes, this is for classic blogger only. In new blogger, you can insert the ads inbetween the posts by adding a new element there.

By the way, thanks for your sharing and your blog looks good.
At 18 March, 2008 23:25, Pravesh said...: Hii This is Pravesh,

I'm getting confused to add my adsense code. First I logged in to blogger.com and clicked on template tab. But in the space given, There r some HTML text. I'm confused where to paste the code.

Check my website www.pravesh-games.blogspot.com. I cant see any ads accept only one. Only one ad appeared during I added a page elemet in layout section. After that I couldn't add a single ad. Please help me.......
At 13 May, 2008 18:16, Ladyheart said...: how about if I wanna put bidvertisers ads just like you did in your blog post? thanks!
At 14 May, 2008 10:41, Joe Li said...: Hi Pravesh,

You can either add the Adsense code into the HTML code inside the template tab, or add a new element inside the layout tab, in order to show the Adsense ads. Both methods work.
At 14 May, 2008 10:42, Joe Li said...: Hi ladyheart,

Yes, this trick still applies when you use Bidvertiser javascript code.